![]() The principle of 3D reconstruction by infrared VCSEL structured light is quite similar, differing only in the light source and projection. By scanning and alignment, we will get serial 3D point cloud data, which can be encapsulated by the software to generate the corresponding 3D model (3D mesh model). In this way, we can continuously acquire the dynamic 3D information of laser beams when using the 3D scanner. Then corresponding spatial coordinates (X, Y, Z) of the laser beams can be calculated according to the image parallax obtained by the cameras. Working principle of infrared parallel laser 3D reconstruction: iReal M3 projects seven infrared parallel lasers onto the scanned object, which was deformed by the geometry of objects, and its two sets of calibrated industrial cameras will capture the laser beams on the object. IReal M3 adopts two light sources: parallel infrared laser lines and infrared VCSEL structured light, to complete optical measurements based on the triangulation principle. ![]() * Our company reserves the right to explain and modify the described parameters and pictures in the brochure. Please purchase industrial 3D laser scanners from SCANTECH 3D if you have higher requirements for accuracy consistency or need high-precision 3D scanners. The parameters in the table are obtained from the above testing method. ③ Volumetric accuracy: The deviation between the center distance of the spheres and the standard value is obtained by scanning the 1000-mm traceable length artifacts in the marker alignment mode. ② Basic accuracy: The deviation between the sphere diameter and the standard value is obtained by scanning a 100-mm calibration reference sphere in the marker alignment mode. Please do not calibrate under direct sunlight. We suggest not scanning the colorful textures under direct sunlight. ① The scanner supports capturing monochrome 3D data outdoors. Optimal Scanning Distance Range: 300-650 mmĮffective Scanning Distance Range: 280-1000 mm Automatically Remove the Displacement Caused by Human Movements Infrared Linear-array Structured Light (Speckle) It is mainly used in high-definition color 3D archiving and 3D display:ģD digitalization of cultural relics/collections, analysis and detection of important samples on site (such as workpiece damage records, 3D records of vehicle damage and damage assessment, digital management of forensic evidence, criminal investigation site investigation records), creation of 3D databases for scientific research and teaching specimens (such as the establishment of medicinal material specimen libraries, Paleontological specimen database, etc.), VR e-commerce (such as 3D display of shoes), game digital asset production and other extended applications (such as 3D texture transfer, 3D surface area analysis, 3D texture expansion, etc.).ĮN 62471 Photobiological Safety Certificate It will map the multi-angle photos taken by mobile phones/SLRs to the 3D scanning model through an intelligent and semi-automatic process to obtain a high-precision, high-definition, real-color 3D model. ![]() IReal 3D Mapping is an independent 3D smart software specially developed by Scantech for handheld 3D scanners. Large and medium-scale sculptures (≥ 0.3m)Ĭomplementary Software: iReal 3D Mapping Software.Human body parts, busts, or full-body figures.Infrared speckle for human body scanning and medium-large sized objects (≥30 cm) Different materials (Including dark and reflective surfaces).Infrared p arallel l aser lines for scanning objects of different sizes and materials Engineers can use third-party post-processing software to realize data revision/reverse design for 3D printing/production. ![]() The 3D information of the scanned items can be captured smoothly and converted into standard format 3D data (.asc. It is capable of scanning various objects (industrial design objects, car modification parts, artwork, portraits, human body) in the lab or on-site. IReal M3 is a handheld color 3D scanner that comes with 3D scanning software for data acquisition and processing. The European area adopts the EUR (€) as the unit of currency, while the extra-European countries use USD ($). * Please note the price DOES NOT include taxes, import fees, computers, on-site support services (training, etc.), and any other additional costs that may include. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |